娄底附近有没有服务

 Hoist manufacturer

Hand machine: 13462251112 (wechat)

Email: [email?protected]

Address: Weibin Industrial Park, Xinxiang City

Current location: home page > News News

What are the operation items of chain bucket elevator?

Article source: admin release date: August 18, 2020

Do you know the operation and maintenance of the chain bucket elevator? The following is a brief introduction.

Operation items of chain bucket elevator:

1. Before lifting and landing, check whether the surrounding working environment is stable.

2. The elevator is not allowed to carry people up and down.

3. No one is allowed to stand under the elevator.

4. Keep the environment around the elevator clean

5. The hoister must be maintained and managed by the guidance personnel, and the power switch box shall be managed by a designated professional.

When the material is overloaded or the material in the bucket 6 is overloaded, it is necessary to observe whether the material is in the single side.

7. Check whether the placement position of garbage can and material bin meets the lifting standard, and change the placement position in time.

8. When working, observe whether the running speed on both sides of the movable rack is synchronous and parallel to the same plane.

? Maintenance knowledge of chain bucket elevator:

1. During the working process of the hoist, there shall be fixed operators who shall have general technical knowledge and be familiar with the performance of the machine.

2. The operator should check the working condition of all parts regularly, and it is forbidden to clean and repair the parts of the machine during operation.

3. The lubricating oil or grease should be replenished timely and appropriately. Including: all bearing blocks and pins, bearing wheels, movable rack rails, hydraulic cylinders and other parts, especially for the places with grease fittings, grease should be injected every 15 working days to ensure normal lubrication.

4. Check and fill hydraulic oil at any time and check whether various oil ports are loose to ensure smooth oil circuit.

5. The hoist should be inspected and cleaned after a certain period of use (generally 15-20 days).

6. In the process of use, once abnormal operation is found, it is necessary to stop the machine immediately for inspection. Can not overload work, the lifting weight of the hoist is not more than 150kg, to avoid damage to the oil cylinder.

After reading the above contents, I believe that we have more understanding of the ring chain bucket elevator.